270 entries.
AUX 2, INPUT PORT IS SHORTING OUT, HAVE USED DIFFEREENT CABLES, AND OTHERS ARE ALSO HAVING SAME ISSUE.
AUX 2, INPUT PORT IS SHORTENING OUT, HAVE USED DIFFEREENT CABLES, AND OTHERS ARE ALSO HAVING SAME ISSUE.
Turntable 1 continues to sound like crap. It needs at a minimum a new stylus and possibly a cartridge replacement.
Shorts in all the mics. They all sound poor.
Alli put on the station playlist at about 2:05, it worked until I went on about two minutes later; when I turned it back on at around 3:03, it was silent
Listener called in saying the volume of the stream is on the low side and nowhere near that of other radio streams. He tried TuneIn, Radio Box, and a few others and it's the same on all.
Mic 1 is extremely hot and Mic 2 not as bad, but on the hot side.
MICROPHONE EXTENSION IS LOOSE AT THE BASE, HAND TIGHTENED ONLY, MAY NEED ALLENHEAD WRENCH TO PROPERLY TIGHTEN.
The Mics are having problems!
I am using Mic2 and it suddenly cuts out
TT1 needs new cartridge as current one is shot.
CD#3 is skipping more and more and needs to be swapped out for one of the new MP103s CD players that was purchased.
TT1 only playing out of the right channel.
text display is stuck again, still displaying texts from 3 weeks ago, nothing more recent (I tried sending one myself, as a test, was not displayed).
THE BASE NEEDS TO BE TIGHTENED, FINGER TIGHT BY ME ONLY
NEVER MIND. FIGURED IT OUT
PSA'S NOT GETTING OUT. THE TRACK PLAYS BUT NOTHING OVER THE AIR
TT1 playing only out of the right channel and has a serious buzz.
Since we can no longer take readings from the transmitter, due to work being done on the tower (just get a busy signal when calling in), should we still sign on and off, to indicate who was here in studio? Some have, some have not, so having direction from the exec board on this would be helpful. Thanks.
CABLE(S) MALFUNCTIONS, CAUSES STATIC
0 readings on 6 and 7
at 6:50 AM, caller said there was no over air signal
(I listened over air at 5:30 AM)